Thank you for visiting our website.
This site is exclusively reserved for health professionals.

Une professionnelle de santé en train de travailler

I am a health professional

Un patient est au téléphone

I want to access the \“patient\” website

Access

twinKon® Conical Abutments

Banner_TwinKon® Range

Straight screw-retained conical abutments

The conical abutments in the twinKon® systems have been designed to obtain progressive emergence of the prosthesis.

The shoulder is wide enough to encourage the passive fit of the bridge framework.

The abutment is embedded on the external tapered part by friction and screwed into the implant using the prosthesis fixing screw.
This assembly benefits from the characteristics of tapered connection systems.

The conical abutment comes in two diameters: 4.3 mm and 5.4 mm.

Ø 4.3 MM CONICAL ABUTMENT

The Ø 4.3 mm conical abutment has a periodontal height of 2.9 mm, to  facilitate its insertion, a specific activator is available. Impression-taking is carried out directly on the conical abutment with Pick-Up, Pop-Up or digital impression copings.

A cover cap is available with a height of 3 mm to protect the abutment while the bridge is being constructed by the prosthetist.

 

 

Banner_Citation
"The twinKon® is, in my view, an implant which deserves special attention from practitioners concerned for the durability of their implant-based restorations"

Dr. Jean-Pierre Axiotis - Dental Surgeon and tester of the twinKon® implant

twinKon® sleeves for conical abutments

Ø 5.4 MM CONICAL ABUTMENTS

The Ø 5.4 mm conical abutment is available in periodontal heights of 2.4 mm and 3.4 mm.

Impression-taking is carried out directly on the conical abutment with Pick-Up impression copings.

A cover cap is available to protect the abutment while the bridge is being constructed by the prosthetist.

 

DOCUMENTATION

► Download the twinKon® Biological Signature Catalog – twinKon® Conical Abutments

► Download the twinKon® Surgery Manual – twinKon® Conical Abutments

This may interest you