Thank you for visiting our website.
This site is exclusively reserved for health professionals.

Une professionnelle de santé en train de travailler

I am a health professional

Un patient est au téléphone

I want to access the \“patient\” website

Bases and Blanks

Bases and Blancks - EVL Implant System

Single and multiple titanium bases for MULTI and MUA abutments including blanks

Bases

Base for the EVL® implant range

Global D titanium bases are available as a direct implant for EVL® S and K implants and for MULTI and MUA abutments.

The bases are designed to allow the manufacturing of customised zirconia implant abutments, bars and bridges, providing optimum mechanical strength: the combination of a titanium base with the zirconia superstructure is particularly indicated as it absorbs the mechanical stresses transmitted by the zirconia structure.

These bases can also be used by the laboratory for making prostheses using conventional or digital techniques, and which are then subsequently bonded onto the base.

There are bases for single prostheses for each diameter of EVL® implant: Ø 3.3 mm, 4 and 5 mm. Their height can be adjusted by 1 to 2 mm.

Bases for multiple prostheses are available for MULTI and MUA abutments (angled MULTI).

All our bases are available in the CAD software libraries.

"For the construction of single screw-retained prostheses, protecting the connections, the titanium base bonding method is vital."

Joce Perret - Expert Prosthetist

Titanium base for In-Kone® dental implants

Blanks

Pre-milled blanks are designed to allow customised abutments to be built by the laboratory (assuming appropriate equipment is available).

Machining from a titanium block is an effective alternative for implantology professionals wishing to implement a local CAD/CAM solution that guarantees ultra-precise assembly at the implant-prosthesis interface.

Designed and manufactured by Global D, our pre-milled blanks guarantee the implant connection. They are compatible with the patented S3DEL* set-up and enable customised titanium abutments to be made by the laboratory (subject to appropriate equipment) with connections guaranteed to comply with our industrial machining specifications.

*List of compatible machines available on request.

 

In order not to damage the connections, do not put the blanks in an oven.

 

DOCUMENTATION

► Download the Supracrestal Prosthesis Catalogue – EVL® Bases and Blanks

► Download the Digital Solutions Catalogue – EVL® Bases and Blanks

This may interest you